IMS

10/13/2026

JELLYFISH CLOUD! 🚀 New pictures coming in from the SpaceX launch this morning from Florida and the US East Coast! It has this unique look because the rocket and the plume are high enough above Earth that it’s illuminated by sunlight, but down near the ground for us it's still dark before sunrise. If you have a picture, feel free to share!

Florida's sky put on quite a show this morning!

SpaceX's October 13 launch created a massive glowing cloud resembling a jellyfish, visible across Florida and beyond.

What caused this incredible sight? See the photos and learn the science behind the phenomenon, along with the precision engineering that makes spaceflight possible.

Read more and see the photos: https://fl-ims.com/blogs/spacex-jellyfish-launch-florida-october-2026

10/11/2026

Small modular reactors are moving forward in 2026, bringing new demands for precision in nuclear construction.

Our latest article examines how 3D laser scanning, laser trackers, and dimensional metrology help engineers verify large assemblies, equipment alignment, and critical installation interfaces.

Read the full article:
https://fl-ims.com/blogs/small-modular-reactors-2026-precision-metrology-nuclear-construction

10/06/2026

Before you machine a casting, check that it has enough material in the right places. Our latest article explains how 3D scanning helps identify dimensional problems before you commit machine time.

Read the article from Innovative Measurement Solutions: https://fl-ims.com/blogs/3d-scanning-casting-inspection-before-machining

10/05/2026

Smart shipyards are changing how vessels are built, measured and maintained. Our latest article looks at robotics, digital twins, 3D scanning and where dimensional metrology fits into modern shipbuilding.
Read the full article: https://fl-ims.com/blogs/smart-shipyards-3d-metrology-future-shipbuilding

10/03/2026

Autonomous aircraft inspection is moving from concept to real-world testing. Our latest article looks at how 3D scanning, LiDAR and digital twins are changing aerospace maintenance, and where metrology-grade dimensional measurement fits into the process.
Read the full article:
https://fl-ims.com/blogs/3d-scanning-digital-twins-aircraft-inspection-air-force-2026

10/02/2026

How confident are you in your measurement results?
Our latest article breaks down the difference between accuracy, calibration, traceability, and measurement uncertainty, and explains why each matters when inspecting parts, tooling, and assemblies.
Read Calibration Fundamentals: Accuracy, Traceability, and Measurement Uncertainty in 2026 athttps://fl-ims.com/blogs/calibration-fundamentals-accuracy-traceability-measurement-uncertainty

Understand measurement accuracy, uncertainty, metrological traceability, calibration, and ISO/IEC 17025 — and why calibration alone does not guarantee a measurement result is fit for purpose.

09/30/2026

🚨 BREAKING: REPORTS OF GROUND SHAKING ACROSS FLORIDA 🌴🌊

Something moved… and Florida felt it. 😳

From Jacksonville to Orlando… Tampa to Miami… and from Tallahassee down toward the Keys, reports are circulating of sudden rumbling, low vibrations, and that unmistakable feeling like the ground just shifted beneath your feet.

No warning.
No buildup.
Just—

A deep, rolling shake…
Windows rattling…
Floors humming just enough to make everyone stop mid-sentence like:

“…you felt that too?” 👀

Some thought it was thunder.
Some blamed construction.
Others immediately stepped outside because Florida logic kicked in:

• “That wasn't a truck…”
• “That didn't sound normal.”
• “Why did it feel like it came from UNDER the ground??” 😳

And here's the part getting people talking—

It's not just one spot.

Reports appear scattered across different parts of Florida, from the northern part of the state toward Central Florida, South Florida, and farther down toward the Keys.

Officials have not confirmed a statewide earthquake event, and there are no confirmed reports of major damage in this caption. But when the ground starts rumbling, Floridians notice.

So across Florida, people are doing that quiet scan:

Looking at the ground… 👀
Looking at each other…
Then looking at the ground again.

Because we're used to hurricanes, lightning, thunderstorms, extreme heat, and afternoon downpours…

…but when the ground itself starts acting different?

Yeah… that gets your attention real quick. 🌴

Stay alert, Florida. 🚨🌊

09/24/2026

3D metrology is becoming an important part of the digital thread.

Our latest IMS article looks at how 3D scanning, dimensional inspection, laser trackers, and measurement data connect physical manufacturing with digital twins.

For More Information Read the Whole Article Here: https://fl-ims.com/blogs/measurement-data-digital-twins-manufacturing-digital-thread

09/18/2026

BIM, 3D laser scanning, AI, and digital twins are becoming more connected across construction.

Our latest FL-IMS article explains where 3D laser scanning fits in modern Scan-to-BIM workflows, construction verification, existing-condition capture, and digital-twin projects.

Read the full article:
https://fl-ims.com/blogs/from-scan-to-bim-to-digital-twins-3d-laser-scanning-construction

09/15/2026

Better measurement can mean less wasted manufacturing effort.

When dimensional problems are discovered late, the cost can go beyond a rejected part. Additional material, machining time, labor, equipment and production capacity may already be invested.

Our updated article looks at how dimensional metrology can help manufacturers identify variation earlier, reduce avoidable scrap and rework, and make better use of production resources.

It also explains an important distinction: metrology can support more efficient manufacturing, but sustainability improvements should be measured rather than assumed.

Read the full article from Innovative Measurement Solutions:

https://fl-ims.com/blogs/metrologys-role-in-sustainability-reducing-waste-energy-and-rework