Warrego Metal Works

Warrego Metal Works Manufacturer of Ute trays, rigid body stock crates/trays but also specialising in general fab/welding

Tri axle trailer is progressing🤠
31/08/2026

Tri axle trailer is progressing🤠

15/07/2026

130m of welding completed one day last week by Matt and apprentice Alex on a set of fabricated chassis rails for the new build semi 🧑‍🏭👨‍🏭

Fully welded rails front to back, top to bottom

Simple little 20ft ish steel side crate and tray for this single drive acco2mm pressed sides fully welded for longevityS...
13/07/2026

Simple little 20ft ish steel side crate and tray for this single drive acco
2mm pressed sides fully welded for longevity
Side load built into 1300mm pallet door
Aluminium slide out ramp
5mm floor plate
Oversize rear sliding gate with full opening rear door
Rolling centre divide with 50/50 slam shut gates
Stack rod floor grating hinged

New build 45ft Tri-axle lead coming alongFull chassis'd trailer with 20ft of crate and 25ft living
09/07/2026

New build 45ft Tri-axle lead coming along

Full chassis'd trailer with 20ft of crate and 25ft living

Warrego Metal Works recently supplied 6 x adjustable tube dolleys to hold xray tubes for gas pipe weld inspections.
07/07/2026

Warrego Metal Works recently supplied 6 x adjustable tube dolleys to hold xray tubes for gas pipe weld inspections.

Some fabricated pipe and plate assemblies. Hot dipped gal finish
01/07/2026

Some fabricated pipe and plate assemblies. Hot dipped gal finish

Fabricated a grain top for this new little isuzu tipper. Set up for small scale feedlotting.
23/06/2026

Fabricated a grain top for this new little isuzu tipper. Set up for small scale feedlotting.

Quad Cab Ram matched with our 2350mm long tray.Completed with rear 1200mm trundle draw, under tray boxes and a through f...
18/06/2026

Quad Cab Ram matched with our 2350mm long tray.

Completed with rear 1200mm trundle draw, under tray boxes and a through floor second battery mount.

Reverse sensor and camera all cleanly relocated

WMW cruiser tray completed in recent months.Our standard design with a few complimenting features-Rear box tapered draws...
17/06/2026

WMW cruiser tray completed in recent months.
Our standard design with a few complimenting features
-Rear box tapered draws
-Mesh accents
-Jack off skid
-Lightbar and thermal camera headboard mounts
-Headboard enclosure for battery and electrical

We also completed a major rebuild on the aluminium side steps and a touch in the bullbar after these were purchased off a rolled and wrecked it

Fabricated box for hook truckAs straight forward as it looks, it was awkward to make everything work together.Custom bui...
19/02/2026

Fabricated box for hook truck

As straight forward as it looks, it was awkward to make everything work together.

Custom built tool box with fabricated mounting bracket
Relocated auto greaser unit with a new fabricated bracket
Relocated high pressure hydraulic filter with a fabricated riser bracket
Fabricated custom mounting bracket and supplied 60L poly water tank.

Address

32 Linton Street
Roma, QLD
4455

Opening Hours

Monday 6am - 5pm
Tuesday 6am - 5pm
Wednesday 6am - 5pm
Thursday 6am - 5pm

Telephone

0408536392

Website

Alerts

Be the first to know and let us send you an email when Warrego Metal Works posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category