SKEF for Engineer's

Call Directions Website Contact the business

SKEF for Engineer's Hello Engineers job is waiting for you !! Start learning today n earn from tomorrow !!!

🌸 हार्दिक मंगलमय शुभकामना! 🌸साई कृष्ण एजुकेशन फाउन्डेसन (SKEF) परिवारको तर्फबाट यहाँ र यहाँको परिवारजनलाई महान चाड बडा ...
11/10/2026

🌸 हार्दिक मंगलमय शुभकामना! 🌸

साई कृष्ण एजुकेशन फाउन्डेसन (SKEF) परिवारको तर्फबाट यहाँ र यहाँको परिवारजनलाई महान चाड बडा दसैंको पहिलो दिन घटस्थापनाको हार्दिक मंगलमय शुभकामना व्यक्त गर्दछौं!

नवदुर्गा भवानीको कृपाले सबैको जीवनमा सुख, शान्ति, समृद्धि, नयाँ ऊर्जा, सकारात्मकता र उत्तर्ररोत्तर प्रगतिको बाटो सधैं खुल्ला रहोस्। 🙏✨

11/10/2026

Ever wondered how many bags of cement are packed into 1 Cubic Meter (Cum)? 🏗️ Let’s break down the calculations step-by-step for your next construction project or site estimate!

Here is the quick guide using standard civil engineering parameters:

Weight of 1 Cement Bag = 50 kg

Density of Cement = 1,440 kg per cubic meter

Volume of 1 Bag = Mass divided by Density (50 divided by 1,440 gives 0.0347 cubic meters)

Number of Bags in 1 Cum = 1 divided by 0.0347, which equals approximately 28.8 Bags



Watch the video to master this essential site calculation courtesy of Sai Krishna Education Foundation! 📐📊

10/10/2026

Struggling with land measurement units? 📏

Whether you're working on-site or studying civil engineering, understanding land conversions is a must-have skill!

In this quick guide, we break down the core measurements every professional and property owner should know:

1 Foot = 12 Inches / 9 sq. ft.
1 Decimil = 435.6 sq. ft. (or 1,000 Square Kadi)
1 Acre = 100 Decimil = 43,560 sq. ft.
1 Hectare = 2.471 Acres (10,000 sq. meters)

Watch till the end to master these essential land measurement formulas presented by Sai Krishna Education Foundation! 📐✨

09/10/2026

Ever wondered how many 12mm and 16mm rebar pieces you get in 1 Ton of steel? 🏗️🔢Using the standard unit weight formula (weight per meter = diameter squared divided by 162), here is the exact breakdown for standard 12-meter long bars: 1️⃣ 12 mm Diameter Rebar:
• Weight: 0.888 kilograms per meter
• Total Length per Ton: approximately 1,125 meters
• Total Bars per Ton: approximately 94 pieces 2️⃣ 16 mm Diameter Rebar:
• Weight: 1.580 kilograms per meter
• Total Length per Ton: approximately 633 meters
• Total Bars per Ton: approximately 53 pieces Save this handy calculation for your next site estimation and material ordering! 📐🛠️Hashtags:

08/10/2026

How to calculate water tank capacity in minutes! 💧🏗️

Ever wondered how much water a storage tank can hold and how many people it can support?

Here is the simple step-by-step formula:
1️⃣ Calculate Volume:Length × Width × Depth = Volume3m × 2m × 2m = 12 m³
2️⃣ Convert to Liters:1 m³ = 1,000 Liters 12 m³ × 1,000 = 12,000 Liters
3️⃣ Estimate People Served:Assuming an average water consumption of 135 Liters per person per day: 12,000 ÷ 135 ≈ 89 people

A 12,000-liter tank can fulfill the daily water needs of roughly 89 people!

🚰✨Save this post for your next construction project, and follow for more civil engineering tips! 👇

06/10/2026

Master metric to imperial conversions for site measurement in under a minute! 📐🏗️Quick breakdown:
🔹 Length: 1 Meter = 3.281 Feet (~3 ft 3 in 3 soot)
🔹 Area: 1 m² = 10.76 ft²
🔹 Volume: 1 m³ = 35.319 ft³ Save this post for your next site visit! 📌👇Option 2: Short & Direct (Best for quick reads)Quick Unit Conversions for Civil Engineers & Site Supervisors! 👷‍♂️📏• 1 m = 3.281 ft
• 1 m² = 10.76 ft²
• 1 m³ = 35.319 ft³ Which unit conversion do you use most on-site? Let us know in the comments! 👇

04/10/2026

🚨 CONCRETE NEVER LIES! 🏗️

You can make excuses on the construction site, but the test numbers will always tell the truth! 💡

In quality construction, trusting your eyes isn't enough. That’s why Cube Casting & Compressive Strength Testing are essential for every major pour:

✔️ Cube Casting: Concrete sampled & compacted with zero shortcuts.

✔️ 7-Day Test: Checks early strength development.
✔️ 28-Day Test: Verifies the final compressive strength using a Compression Testing Machine.

Tested. Measured. Proven. 📊 Hard data ensures safety and durability every time!

👇 Civil engineers & site engineers, how often do you catch mix issues during 7-day tests? Let’s discuss below!

02/10/2026

🏗️ Under-Reinforced vs. Over-Reinforced Concrete: What’s the Difference? 💡

Ever wondered why structural engineers design concrete elements to fail in a specific way?

In an under-reinforced concrete beam, the steel reinforcement yields first. This results in a ductile failure with visible cracks and large deflections, giving ample warning before any collapse!

On the other hand, in over-reinforced concrete, there is too much steel content. The concrete crushes suddenly without any warning—a dangerous brittle failure.

Which type of design do you think is safer for buildings? Let us know in the comments! 👇

02/10/2026

Student Review: Transforming Theory into Practical Skills! 🎓🏗️

Listen to Ram Pujan Ray from Dhanusha share his 4.5-month learning journey at Sai Krishna Education Foundation! From AutoCAD, SketchUp, Enscape, to complete building design and construction packages, he got all his doubts cleared in a supportive environment.

Looking to upgrade your engineering skills and build a brighter career?
📍 Location: New Baneshwor, Kathmandu (Opposite Shantinagar Gate)
📞 Contact: 980-8398949
🌐 Website: www.saikrishnaeducation.com

02/10/2026

🎓 A degree tells people you studied civil engineering, but your skills show them what you can actually do! 🏗️✨

Fresh out of college and facing the real-world site challenges? 😅 Don't wait for graduation or years of struggle to build practical confidence. Start mastering key technical skills—from structural drawings and building plans to 3D modeling and design calculations—today! 📐💻

At Sai Krishna Education Foundation, we empower future engineers with practical, job-ready training:
✅ Building Design & Construction Packages (AutoCAD, ETABS, Revit, SketchUp & more)
✅ Survey Camp Training
✅ Estimation, Costing & Rate Analysis

🚀 Upgrade your engineering skills and bridge the gap between theory and real site work!

📍 Location: New Baneshwor, Kathmandu (Opposite of Shantingar Gate)
📞 Contact Us: +977 9808398949
🌐 Learn More: www.saikrishnaeducation.com

Address

Kathmandu
44600

Opening Hours

Monday 06:00 - 18:30
Tuesday 06:00 - 18:30
Wednesday 06:00 - 18:30
Thursday 06:00 - 18:30
Friday 06:00 - 18:30
Saturday 06:00 - 18:30
Sunday 06:00 - 18:30

Telephone

+9779808398949

Website

, ,

Alerts

Be the first to know and let us send you an email when SKEF for Engineer's posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to SKEF for Engineer's:

Shortcuts

Share

Category

Nearby engineering companies

Other Science, Technology & Engineering in Kathmandu

Show All