Tyler's Welding

Tyler's Welding Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Tyler's Welding, Industrial Company, Chestertown, MD.

Banged out a couple short railings this evening and tomorrow will be installing another 30 foot railing with them. All s...
04/28/2026

Banged out a couple short railings this evening and tomorrow will be installing another 30 foot railing with them. All steel railing and will be painted black when all 3 are installed.

The caboose is coming along. Got both window boxes finished, the hvac mounts built, interior is getting insulated and th...
04/26/2026

The caboose is coming along. Got both window boxes finished, the hvac mounts built, interior is getting insulated and the ladder benches are almost done. Can't wait to see her when she's finished

Got one of the old window boxes cut out and replaced with new steel. Not looking forward to putting all these rivets bac...
01/19/2026

Got one of the old window boxes cut out and replaced with new steel. Not looking forward to putting all these rivets back so it looks original.

Train car is coming along. Taking an old caboose and turning it into an era accurate man cave. It's been a lot of work s...
01/11/2026

Train car is coming along. Taking an old caboose and turning it into an era accurate man cave. It's been a lot of work so far. I had to put a floor in, put a roof on, built a crows nest lookout area, cut all the rusted out bottoms on the siding and welded new sheet metal in, built a set of steps on one side, got a spot for the woodstove built and spray foamed in, and started building the high bench seats in the crows nest lookout area. Still got a long way to go but definitely one of the coolest builds I've been part of. Stay tuned for finished product.

Had an old rail car that pulls boats out to repair. All the I beam cross members were rusted out along with some pipe an...
01/11/2026

Had an old rail car that pulls boats out to repair. All the I beam cross members were rusted out along with some pipe and pins. I torch cut out all the corroded material and replaced with new I beam. Also replaced the rusted pipes and made some custom pins to connect the 2 sections of the car together. Turned out great just in time for winter.

Customer wanted a fishing platform for his boat so he could bowfish off the bow. He gave me dimensions and I fabricated ...
04/16/2025

Customer wanted a fishing platform for his boat so he could bowfish off the bow. He gave me dimensions and I fabricated an aluminum platform with 2" x 2" square tubing and 1/4" plate. I added (4) 4" x 4" legs and feet. Finally I built a 2' railing to lean over and a short step in the back to help climb on the platform.

Customer brought in an old part off a van and needed two new ones fab'd up. I traced some templates from the old part an...
02/23/2025

Customer brought in an old part off a van and needed two new ones fab'd up. I traced some templates from the old part and cut them with a plasma cutter. Got all the holes drilled and welded together.

This one was interesting. Made a couple parts out of aluminum pipe and a piece of square stock running down the middle o...
02/15/2025

This one was interesting. Made a couple parts out of aluminum pipe and a piece of square stock running down the middle of the pipe. The customer will pour melted down lead in and will have a molding he can attach to the bottom of fishing nets for weights. It unbolts and splits in 2 for ease of removal when the molding is cooled.

Had a customers tractor arm completely rust off at the end of it where the bucket attachment pins through. I plasma cut ...
01/20/2025

Had a customers tractor arm completely rust off at the end of it where the bucket attachment pins through. I plasma cut the rust off back to workable metal. Started welding rest of the arm back on along with fishplates on the top and bottom. Next I welded a one inch tubing sleeve through it for the pin to go through. Once I got the arm finished I cut the busted up ends off the bucket attachment and welded new metal on it. I put pieces of that one inch tubing on the attachment and lined them up with the sleeve in the arm. Finally I made a pin and put it all back together. I threw a little rattle can on it to prevent surface rusting. Turned out really good.

01/03/2025

Pictures don't really do this justice. Sheeted the walls and ceiling with steel plate and flat barred the seems. Used steel channel for the floor trim and door ways. Custom built steel bookshelf and coffee bar with lights in each compartment. Custom shelf in front and with a Murphys door in the center. It was quite a challenge at times but turned out incredible.

Address

Chestertown, MD
21620

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 9am - 5pm
Sunday 9am - 5pm

Telephone

+13023576247

Website

Alerts

Be the first to know and let us send you an email when Tyler's Welding posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category