Integrated Packaging Solutions

Call Directions Website Contact the business

Integrated Packaging Solutions Integrated Packaging Solutions (IPS) supports the can-manufacturing industry by providing specialized products and can-making services.

Product lines include (1) Tooling Surface Finish Products, (2) Tooling Inspection Products, (3) Washer and Oven Products, (4) Tool Tracking and Inventory Control Software and more. Can-maker services include (1) Equipment Support, (2) Oven Support, (3) Line Control and Electrical Support, (4) Project Management, (5) Engineering Support, and (6) Integration Support. IPS also provides technical training through its CanSCHOOL department.

10/14/2026

Let's be honest... nobody is asking for more complicated equipment.

You want equipment that's easy to use, built to last, and priced in a way that makes sense for your operation. That's been the focus of Altek products for years.
Altek solutions are designed to help can makers get reliable performance without unnecessary complexity or excessive cost.

10/13/2026

"Scratches on cups can come from more places than you might think.

Whether they're appearing on the inside or outside of the cup, common causes include tooling damage, debris buildup, trapped scrap, loose components, or pre-existing scratches in the coil stock.

A thorough inspection and cleaning of key cupper components can often help eliminate the problem before it becomes a larger quality issue.

But scratches are only one defect can makers battle every day. What defect do you see most often on your cupper, and what's usually the root cause? Share your experience in the comments.

"

10/07/2026

Every measurement influences the decisions that follow.

When tooling measurements are quick, repeatable, and accurate, operators can spend less time questioning results and more time making informed decisions. The ToolSCAN 2.0™ automates the measurement process, helping plants optimize regrind intervals, reduce premature tool replacement, and assemble more precise tool packs.

Better measurements in the tool room can lead to fewer defects, lower scrap rates, and improved product quality on the production floor.

10/06/2026

Equipment is a significant investment. When you buy a piece of testing equipment, you expect it to do its job reliably for years, not become something you need to replace after a short time.

That's what can makers have come to expect from Altek equipment. It's built for production environments, holds up to daily use, and delivers consistent results.

The Altek Mobility Tester is a durable, dependable testing solution that helps you get the data you need at a price that makes sense.

10/05/2026

Troubleshooting bodymaker defects starts with one critical step: identifying the defect correctly.

In this CanSCHOOL spotlight, we take a look at common dome, sidewall, and edge defects. Once the defect is identified, the real troubleshooting begins by tracking down the root cause.

Of course, these are just a few of the many defects can makers encounter on the bodymaker.

What defects do you see most often? Drop them in the comments and share what typically causes them!

10/01/2026

The Cupper is the first metal forming process of can making, and how the aluminum is fed into the press is crucial for success. Although there are variations on how it's done, the concept is fairly standard. A giant coil of Aluminum are held by the uncoiler, which feeds the coil through a lubricator before it enters the Cupper.

09/29/2026

Plant managers and production teams already have enough to worry about. Your testing equipment should deliver reliable results, be easy to use, and hold up year after year without breaking the budget.

That's the philosophy behind Altek.

Offering dependable testing equipment & IPS-backed service and support, we're focused on helping can makers make confident decisions while keeping an eye on the bottom line.

09/28/2026

Every can maker wants consistent cross hatch results.

But operator variation, limited process visibility, and time-consuming troubleshooting can make that easier said than done.

The X2 PRO™ was engineered to bring greater control to the cross hatch process with automated media feeding, enhanced diagnostics, activity tracking, and seamless integration with plant systems or IPS ToolCONTROL™ .

09/23/2026

One Week Left: Save 20% on Operational Onsite Support

Need can makers, not just labor?

When experienced operators are unavailable, production goals, project timelines, and line performance can quickly be impacted. Finding people who already understand can making equipment and processes is often the biggest challenge.

IPS provides experienced can makers, machine operators, and technical specialists who can seamlessly integrate into your operation and help keep your line performing at its best.

Support available for:

✔ Front End
✔ Back End
✔ Line Control
✔ Millwright
✔ Ovens
✔ ETs

Limited-time End of Summer Sale. Offer ends in one week!

09/22/2026

Only One Week Remaining to Save 20% on Operational Onsite Support!

Running a can line takes more than manpower. It takes experience.

From bodymakers and decorators to ovens and line control systems, experienced can makers play a critical role in maintaining safe and reliable production.

If you're facing a temporary staffing shortage, supporting a special project, or need additional technical expertise, IPS can help.

Our experienced can makers and technical specialists are available to support:

• Front End
• Back End
• Line Control
• Millwright
• Ovens
• ETs

Don't miss your chance to save 20% before this promotion ends!!

Address

15680 West 6th Avenue Frontage Rd
Golden, CO
80401

Opening Hours

Monday 8am - 5pm
Tuesday 8:30am - 4:30pm
Wednesday 8:30am - 4:30pm
Thursday 8:30am - 4:30pm
Friday 8:30am - 4:30pm

Telephone

(303) 426-4881

Website

,

Alerts

Be the first to know and let us send you an email when Integrated Packaging Solutions posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Integrated Packaging Solutions:

Shortcuts

Share

Category