Authentise

Name: Authentise
Address: 701 S 50th Street, Philadelphia, PA, 19143, US
Telephone: +16502040053

The Backbone of the Digital Manufacturing Revolution We make process automation software for additive and digital manufacturing. Check out www.authentise.com

04/21/2026

Most engineering teams don’t lose data.
They lose context.
The why behind a decision.
The who that approved it.
The moment something changed.

And once that’s gone…
You’re left guessing. Reworking. Explaining.

That’s exactly why we built Whisper.
And now we’re showing it in action. 👇

🎥 Webinar: Whisper - Stop Losing Engineering Context
🗓️ 30 April 2026
🕓 4PM GMT / 11AM ET

See how Whisper:
Captures decisions as they happen (not after the fact)
Connects conversations across email, chat, meetings & docs
Makes engineering context searchable, traceable, and usable

All without changing how your team already works.

If your team has ever asked:
"Why did we do it this way?"
This is for you!

👉 Link to signup in comments

04/16/2026

Big 24 hours for Authentise 🚀
Yesterday, we launched Whisper - a new way to capture engineering intent and turn it into auditable decisions and safe actions across your existing toolchain.

And today we can share that...

🏆 We’ve won the Software Award at The TCT Group Awards for RREQAM!!🥳

RREQAM (Rapid Reverse Engineering & Qualification for AM) brings together two of the biggest challenges in additive manufacturing:
👉 Turning legacy drawings into structured, usable data
👉 Qualifying parts through a connected, traceable workflow

All in one continuous digital thread.
No more disconnected systems.
No more lost knowledge.

Just faster, more reliable paths from legacy data to qualified parts.
Two big moments. One direction.

A huge thank you to our team, partners, and customers who continue to push this forward with us.

We’re just getting started!

We'll post the links to further details about Whisper AND RREQAM below - go take a look!

📸 Courtesy of SME

04/15/2026

🚨LAUNCH ALERT!🚨

Today, we’re launching ... Whisper!

A new kind of infrastructure for engineering teams.

It captures decisions where they actually happen - and turns them into auditable, traceable actions across your toolchain.

❌ No new tools.
❌ No behaviour change.
✔️ Just the missing layer - now visible!

🎥 Watch the video below
📄 Read the full announcement: link to Press Release in comments.

Let us know your thoughts and questions - comment below!

04/01/2026

You don’t need material anymore.

Today, we’re announcing a new add-on for Authentise Flows.

🧪 Infinite Materials™

Available now.
Free for all current customers to trial.*

For years, additive manufacturing has had one stubborn constraint:

You still need material.

Powder delays.
Stock variability.
Requalification cycles.

So we removed it.

With Infinite Materials™, Flows now:
✔ Generates powder on demand
✔ Instantly recreates certified materials
✔ Maintains full genealogy (even for materials created mid-build)

Ran out halfway through a job?

Flows will automatically produce more material
and continue the build without interruption.

No sourcing.
No waiting.
No supply chain.

Because the fastest way to manage materials…
is not to need them at all.

—

Still in beta. Physics compliance pending.

Happy April Fools from Authentise 😄

03/25/2026

Today we are at DEVELOP3D LIVE in Warwick!

We’re quietly showing something new - not announced, not launched, not fully explained yet.

Just… there.

If you’re working in engineering, manufacturing, or digital thread - it might be worth a look...

📍 Come find us.

03/20/2026

One of the best parts of being a global team is learning from each other.

This week, we had a brilliant session where one of our colleagues shared what Ramadan really means to them - beyond what you might read online.

It gave us a new perspective on the discipline, reflection, and community behind it.

As Ramadan comes to an end, we just wanted to say:
Eid Mubarak to everyone celebrating 🌙

03/18/2026

It’s Global Recycling Day 🌍♻️

And when we talk about sustainability in manufacturing, the focus is usually on materials…

Recycling plastic.
Reusing metal powders.
Reducing waste.

But here’s something we don’t talk about enough 👇

A lot of waste in additive manufacturing happens before a part is even made.

❌ Failed builds
❌ Duplicate prints
❌ Materials that can’t be reused because no one tracked them properly

That’s not really a materials problem.

It’s a process problem.

Because the most sustainable material…
is the one you never had to use in the first place.

Better workflows.
Clearer data.
Less guesswork.

That’s where real impact happens.

What’s the biggest source of waste you’ve seen in manufacturing? 👇

03/11/2026

✈️ A busy week ahead for the Authentise team!

Next week you'll find us at two great additive manufacturing events.

🔹 AMUG – Our CEO Andre Wegner will be there and the Authentise team will have a booth on the show floor. If you're attending, feel free to stop by and say hello!

🔹 AM Village – Our colleague Tex will also be joining this unique workshop, which brings together experts from industry, academia, and the armed forces to explore real-world applications of additive manufacturing.

If you're attending either event and would like to connect, we'd love to meet you.

📅 We've added calendar links in the comments if you'd like to schedule some time.

Looking forward to some great conversations next week!

03/10/2026

For several years, we have seen additive manufacturing software play a more central role in our industry. LPBF machines achieve higher yields and can produce thinner-walled parts thanks to the...

03/03/2026

🚀 DID YOU KNOW????

We’ve seamlessly integrated Autodesk Fusion APIs into Authentise Flows - bringing powerful design-for-manufacturing capabilities directly into your production workflow.

What does that mean in practice?

It means you can now:

✔️ Check design quality
✔️ Generate supports
✔️ Slice and nest builds
✔️ Create machine-specific build files
✔️ Work on live Fusion data
✔️ Maintain continuous version control

All from within Flows.

No file juggling.
No broken workflows.
No security compromises.

And if you need to adjust the design or send the part directly to the machine? You can jump straight into Fusion - with the correct version already loaded.

This isn’t just another software connection. It’s a step toward truly unified engineering and manufacturing workflows - where teams can choose the exact capabilities they need, when they need them.

As our CEO Andre Wegner put it:

“Never before have so many individual manufacturing services been accessible in one place.”

We’re proud to build on our long-standing collaboration with Autodesk and to help create a more open, competitive, and scalable ecosystem for additive manufacturing.

🔎 Want to see it in action?
Book a demo via our website today.
Visit the link in our bio!

Address

701 S 50th Street
Philadelphia, PA
19143

Telephone

+16502040053

Website

http://www.authentise.com/

Alerts

Be the first to know and let us send you an email when Authentise posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Authentise:

Shortcuts

Featured

Treacy Brothers General Contractors LLC

Want your business to be the top-listed Engineering Company in Philadelphia?