Filtration Management Solutions - Pty Ltd

Call Directions Website Contact the business

Filtration Management Solutions - Pty Ltd Filtration Management Solutions helps operations cut downtime and boost profitability through world-class contamination control.

We deliver hands-on consulting, training, and high-efficiency lubrication best-practice solutions with dependable service.

Every vote counts! 🇿🇦 Make your voice heard and help shape South Africa’s future.Happy voting day from FMS Africa!
04/11/2026

Every vote counts! 🇿🇦 Make your voice heard and help shape South Africa’s future.

Happy voting day from FMS Africa!

❗🔴 𝗪𝗵𝗲𝗻 𝘁𝗵𝗲 𝗼𝗶𝗹 𝗿𝗲𝗽𝗼𝗿𝘁 𝗰𝗼𝗺𝗲𝘀 𝗯𝗮𝗰𝗸 𝗿𝗲𝗱, 𝘁𝗵𝗲 𝗰𝗹𝗼𝗰𝗸 𝘀𝘁𝗮𝗿𝘁𝘀.High particle counts. Hydraulic, servo or proportional valves st...
03/11/2026

❗🔴 𝗪𝗵𝗲𝗻 𝘁𝗵𝗲 𝗼𝗶𝗹 𝗿𝗲𝗽𝗼𝗿𝘁 𝗰𝗼𝗺𝗲𝘀 𝗯𝗮𝗰𝗸 𝗿𝗲𝗱, 𝘁𝗵𝗲 𝗰𝗹𝗼𝗰𝗸 𝘀𝘁𝗮𝗿𝘁𝘀.

High particle counts. Hydraulic, servo or proportional valves sticking. Water in the oil. A full oil change you didn't plan for.

These are the calls our Respond service is built for. We bring a filtration unit to site, connect it while the system keeps working where possible, and pull the contamination back down, fast.

𝙒𝙝𝙖𝙩 𝙬𝙚 𝙘𝙖𝙣 𝙥𝙪𝙩 𝙤𝙣 𝙩𝙝𝙚 𝙥𝙧𝙤𝙗𝙡𝙚𝙢:
→ Vacuum dehydration for water and gas
→ High-flow off-line filtration for particles and free water
→ Varnish and oxidation by-product removal
→ Diesel particle and water removal
→ On-site laser particle counting to check progress

And because we sample before and after, you get proof the oil is back in spec, not just a unit that was switched on.

𝗗𝗶𝗿𝘁𝘆 𝗼𝗶𝗹 𝗲𝗺𝗲𝗿𝗴𝗲𝗻𝗰𝘆? Call us on +27 11 397 1135 or email [email protected].

𝘽𝙚 𝙇𝙪𝙗𝙚 𝙎𝙢𝙖𝙧𝙩 💡 ℂ𝕝𝕖𝕒𝕣 𝕕𝕠𝕖𝕤𝕟'𝕥 𝕞𝕖𝕒𝕟 𝕔𝕝𝕖𝕒𝕟.𝗛𝗼𝗹𝗱 𝘂𝗽 𝗮 𝘀𝗮𝗺𝗽𝗹𝗲 𝗼𝗳 𝗵𝘆𝗱𝗿𝗮𝘂𝗹𝗶𝗰 𝗼𝗶𝗹. 𝐈𝐭'𝐬 𝐛𝐫𝐢𝐠𝐡𝐭, 𝐜𝐥𝐞𝐚𝐫, 𝐭𝐡𝐞 𝐫𝐢𝐠𝐡𝐭 𝐜𝐨𝐥𝐨𝐮𝐫. Most p...
02/11/2026

𝘽𝙚 𝙇𝙪𝙗𝙚 𝙎𝙢𝙖𝙧𝙩 💡
ℂ𝕝𝕖𝕒𝕣 𝕕𝕠𝕖𝕤𝕟'𝕥 𝕞𝕖𝕒𝕟 𝕔𝕝𝕖𝕒𝕟.

𝗛𝗼𝗹𝗱 𝘂𝗽 𝗮 𝘀𝗮𝗺𝗽𝗹𝗲 𝗼𝗳 𝗵𝘆𝗱𝗿𝗮𝘂𝗹𝗶𝗰 𝗼𝗶𝗹.

𝐈𝐭'𝐬 𝐛𝐫𝐢𝐠𝐡𝐭, 𝐜𝐥𝐞𝐚𝐫, 𝐭𝐡𝐞 𝐫𝐢𝐠𝐡𝐭 𝐜𝐨𝐥𝐨𝐮𝐫. Most people would put it straight back in the machine.

But the eye only sees particles from about 40 microns. The ones that wear pumps, valves and bearings are a few microns and invisible in the bottle. Dissolved water is invisible too, until the oil passes its saturation point and turns hazy.

So "it looks fine" is a guess, not a test.

𝘛𝘩𝘳𝘦𝘦 𝘴𝘪𝘮𝘱𝘭𝘦 𝘴𝘵𝘦𝘱𝘴 𝘣𝘦𝘺𝘰𝘯𝘥 𝘢𝘱𝘱𝘦𝘢𝘳𝘢𝘯𝘤𝘦::

1. Take a proper sample from the right point, with the machine running
2. Measure particles against ISO 4406 and water in ppm
3. Set a cleanliness target per machine and trend against it

Need a quick answer on site? A 𝒑𝒐𝒓𝒕𝒂𝒃𝒍𝒆 𝒍𝒂𝒔𝒆𝒓 𝒑𝒂𝒓𝒕𝒊𝒄𝒍𝒆 𝒄𝒐𝒖𝒏𝒕𝒆𝒓 𝒈𝒊𝒗𝒆𝒔 𝒂𝒏 𝑰𝑺𝑶 4406 𝒂𝒏𝒅 𝑾𝒂𝒕𝒆𝒓 (𝑹𝑯%) 𝒄𝒐𝒅𝒆 in minutes.

What's the most surprising oil result you've seen from a sample that looked clean?

30/10/2026
𝗗𝗶𝗿𝘁𝘆 𝗼𝗶𝗹 𝗱𝗼𝗲𝘀𝗻'𝘁 𝘄𝗮𝗶𝘁 𝗳𝗼𝗿 𝗮 𝗰𝗮𝗽𝗶𝘁𝗮𝗹 𝗯𝘂𝗱𝗴𝗲𝘁.That's why we've built Oil Rx by FMS Africa, our contamination control renta...
30/10/2026

𝗗𝗶𝗿𝘁𝘆 𝗼𝗶𝗹 𝗱𝗼𝗲𝘀𝗻'𝘁 𝘄𝗮𝗶𝘁 𝗳𝗼𝗿 𝗮 𝗰𝗮𝗽𝗶𝘁𝗮𝗹 𝗯𝘂𝗱𝗴𝗲𝘁.

That's why we've built Oil Rx by FMS Africa, our contamination control rental programme: clean oil and proof of results, without buying equipment first.

𝙊𝙣𝙚 𝙥𝙧𝙤𝙜𝙧𝙖𝙢𝙢𝙚, 𝙩𝙝𝙧𝙚𝙚 𝙬𝙖𝙮𝙨 𝙩𝙤 𝙪𝙨𝙚 𝙞𝙩:
🔴 𝗥𝗘𝗦𝗣𝗢𝗡𝗗: emergency filtration Particle counts are high, valves are sticking or water is in the oil. We get a filtration unit on the system fast.
🟡 𝗣𝗥𝗢𝗩𝗘: filtration trial Not sure filtration will pay off? Rent for a defined period. We sample before, filter, sample after, and give you a report that shows the improvement.
🟢 𝗣𝗥𝗘𝗩𝗘𝗡𝗧: planned maintenance rental Clean up before something fails. Planned maintenance programme: initial sample, install and run filtration, monitor, final sample and report.

Our fleet covers water removal, high-volume particle removal, varnish, diesel and on-site particle counting. 𝘖𝘷𝘦𝘳 𝘵𝘩𝘦 𝘯𝘦𝘹𝘵 𝘧𝘦𝘸 𝘸𝘦𝘦𝘬𝘴 𝘸𝘦'𝘭𝘭 𝘪𝘯𝘵𝘳𝘰𝘥𝘶𝘤𝘦 𝘦𝘢𝘤𝘩 𝘶𝘯𝘪𝘵 𝘢𝘯𝘥 𝘩𝘰𝘸 𝘰𝘶𝘳 𝘵𝘦𝘢𝘮 𝘶𝘴𝘦𝘴 𝘪𝘵 𝘰𝘯 𝘴𝘪𝘵𝘦.

𝗪𝗵𝗶𝗰𝗵 𝗼𝗳 𝘁𝗵𝗲 𝘁𝗵𝗿𝗲𝗲 𝗳𝗶𝘁𝘀 𝘄𝗵𝗲𝗿𝗲 𝘆𝗼𝘂𝗿 𝗽𝗹𝗮𝗻𝘁 𝗶𝘀 𝘁𝗼𝗱𝗮𝘆?

📞 +27 11 397 1135 · ✉️ [email protected] Full programme overview: link in the comments.

⛳ A great day of connections at the MEMSA Golf Day 2026!Congratulations to MEMSA on 10 years of building South Africa's ...
15/10/2026

⛳ A great day of connections at the MEMSA Golf Day 2026!

Congratulations to MEMSA on 10 years of building South Africa's mining equipment and services industry.

Thank you to everyone who stopped by, connected with our team, and helped make the day a success. Strong industries are built through strong partnerships. 🤝

⛳ We’re getting ready for the MEMSA Golf Day!We’re looking forward to a great day on the green and connecting with every...
13/10/2026

⛳ We’re getting ready for the MEMSA Golf Day!

We’re looking forward to a great day on the green and connecting with everyone joining us.

If you’re here today, come say hi! 👋

01/10/2026

🗓️ 👀 Looking back at a great week at 𝐄𝐥𝐞𝐜𝐭𝐫𝐚 𝐌𝐢𝐧𝐢𝐧𝐠 𝐀𝐟𝐫𝐢𝐜𝐚 𝟐𝟎𝟐𝟔!⚙️

It was fantastic meeting new people across the industry, reconnecting with familiar faces and having valuable conversations about lubrication, contamination control and equipment reliability.

Thank you to everyone who stopped by for a chat — we’re leaving with new connections, fresh ideas and conversations worth continuing.

Until next time! 👋

25/08/2026

💬𝘍𝘰𝘶𝘳-𝘮𝘪𝘤𝘳𝘰𝘯 𝘱𝘢𝘳𝘵𝘪𝘤𝘭𝘦𝘴 𝘤𝘢𝘶𝘴𝘦 𝘵𝘩𝘦 𝘮𝘰𝘴𝘵 𝘥𝘢𝘮𝘢𝘨𝘦 𝘣𝘦𝘤𝘢𝘶𝘴𝘦 𝘵𝘩𝘦𝘺 𝘢𝘳𝘦 𝘵𝘩𝘦 𝘱𝘦𝘳𝘧𝘦𝘤𝘵 𝘴𝘪𝘻𝘦 𝘵𝘰 𝘦𝘯𝘵𝘦𝘳 𝘤𝘳𝘪𝘵𝘪𝘤𝘢𝘭 𝘤𝘭𝘦𝘢𝘳𝘢𝘯𝘤𝘦𝘴. — FMS Africa

And that’s exactly why “𝘤𝘭𝘦𝘢𝘯” oil 𝐢𝐬𝐧’𝐭 𝐧𝐞𝐜𝐞𝐬𝐬𝐚𝐫𝐢𝐥𝐲 𝐜𝐥𝐞𝐚𝐧 𝐞𝐧𝐨𝐮𝐠𝐡.

Particles around this size can move directly into the tight operating clearances of hydraulic and lubrication systems, contributing to:

• Accelerated component wear
• Abrasion and surface damage
• Reduced equipment efficiency
• Shorter component life
• Unplanned downtime

𝐓𝐡𝐞 𝐬𝐦𝐚𝐥𝐥𝐞𝐬𝐭 𝐩𝐚𝐫𝐭𝐢𝐜𝐥𝐞𝐬 𝐜𝐚𝐧 𝐨𝐟𝐭𝐞𝐧 𝐛𝐞 𝐭𝐡𝐞 𝐡𝐚𝐫𝐝𝐞𝐬𝐭 𝐭𝐨 𝐬𝐞𝐞 👀— 𝐛𝐮𝐭 𝐭𝐡𝐞𝐲 𝐜𝐚𝐧 𝐡𝐚𝐯𝐞 𝐬𝐨𝐦𝐞 𝐨𝐟 𝐭𝐡𝐞 𝐛𝐢𝐠𝐠𝐞𝐬𝐭 𝐜𝐨𝐧𝐬𝐞𝐪𝐮𝐞𝐧𝐜𝐞𝐬.‼️

𝑪𝒐𝒏𝒕𝒂𝒎𝒊𝒏𝒂𝒕𝒊𝒐𝒏 𝒄𝒐𝒏𝒕𝒓𝒐𝒍 isn’t about making oil look clean. It’s about 𝒄𝒐𝒏𝒕𝒓𝒐𝒍𝒍𝒊𝒏𝒈 𝒑𝒂𝒓𝒕𝒊𝒄𝒍𝒆 𝒍𝒆𝒗𝒆𝒍𝒔 𝒕𝒐 𝒕𝒉𝒆 𝒄𝒍𝒆𝒂𝒏𝒍𝒊𝒏𝒆𝒔𝒔 𝒔𝒕𝒂𝒏𝒅𝒂𝒓𝒅 𝒚𝒐𝒖𝒓 𝒆𝒒𝒖𝒊𝒑𝒎𝒆𝒏𝒕 𝒂𝒄𝒕𝒖𝒂𝒍𝒍𝒚 𝒓𝒆𝒒𝒖𝒊𝒓𝒆𝒔.

Because when it comes to reliability, what you can’t see can still cost you.

✉️📞Let’s book a conversation today:
[email protected]
+27 (0) 11 397 1135

17/08/2026

Mining, industrial, manufacturing—complex, harsh environments where 𝗹𝘂𝗯𝗿𝗶𝗰𝗮𝘁𝗶𝗼𝗻 𝗱𝗶𝘀𝗰𝗶𝗽𝗹𝗶𝗻𝗲 𝗺𝗮𝘁𝘁𝗲𝗿𝘀 𝗺𝗼𝘀𝘁.

But here’s our 𝗠𝗔𝗜𝗡 𝗦𝗧𝗥𝗘𝗡𝗚𝗧𝗛:
𝑎 ℎ𝑖𝑔ℎ𝑙𝑦 𝑠𝑘𝑖𝑙𝑙𝑒𝑑, 𝐼𝐶𝑀𝐿-𝑐𝑒𝑟𝑡𝑖𝑓𝑖𝑒𝑑 𝑡𝑒𝑎𝑚 𝑤𝑖𝑡ℎ 𝑡ℎ𝑒 𝑒𝑛𝑒𝑟𝑔𝑦, 𝑝𝑎𝑠𝑠𝑖𝑜𝑛, 𝑎𝑛𝑑 𝑤𝑖𝑙𝑙 𝑡𝑜 𝑑𝑜 𝑡ℎ𝑒 ℎ𝑎𝑟𝑑 𝑤𝑜𝑟𝑘 𝑝𝑟𝑜𝑝𝑒𝑟𝑙𝑦—𝙚𝙫𝙚𝙧𝙮 𝙩𝙞𝙢𝙚.

We don’t aim to create “customers.”
We aim to create 𝒑𝒂𝒓𝒕𝒏𝒆𝒓𝒔𝒉𝒊𝒑𝒔—aligned to reliability goals, measurable outcomes, and long-term trust.
𝐓𝐫𝐚𝐢𝐧𝐢𝐧𝐠. 𝐂𝐨𝐧𝐬𝐮𝐥𝐭𝐢𝐧𝐠. 𝐀𝐮𝐝𝐢𝐭𝐬. 𝐈𝐦𝐩𝐥𝐞𝐦𝐞𝐧𝐭𝐚𝐭𝐢𝐨𝐧.

We work where 𝑟𝑒𝑙𝑖𝑎𝑏𝑖𝑙𝑖𝑡𝑦 is earned, not promised.

𝑪𝒐𝒎𝒊𝒏𝒈 𝒏𝒆𝒙𝒕: the final chapter isn’t about products or projects — it’s about the culture that protects standards when conditions get tough.
Part 12 drops next.

Address

Unit 13, George Palmer Business Park, Burry Koen Street
Boksburg
1459

Alerts

Be the first to know and let us send you an email when Filtration Management Solutions - Pty Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Filtration Management Solutions - Pty Ltd:

Shortcuts

Share

Nearby engineering companies