MiTek South Africa

11/06/2026

Did you know that MiTek South Africa has achieved triple ISO certification?

The three internationally recognised ISO standards awarded, underline our continued commitment to operating at the highest levels of quality, safety and environmental responsibility.

The certifications awarded are:

· ISO 9001:2015 – Quality Management Systems

· ISO 45001:2018 – Occupational Health & Safety Management Systems

· ISO 14001:2015 – Environmental Management Systems

What this means for MiTek customers:

➡️ Reliable, consistent quality

ISO 9001 confirms that our processes are structured and controlled, ensuring we deliver products and services that consistently meet quality expectations.

➡️ A strong focus on health and safety

ISO 45001 demonstrates that we prioritise the health and safety of our people and partners.

➡️ A responsible environmental approach

ISO 14001 demonstrates our ongoing work to reduce environmental impact, manage resources efficiently and support sustainable industry practices.

Smuts, SHEQ Manager, MiTek South Africa explains: “Together, these standards reflect robust systems across MiTek South Africa, shaping the way we work with customers, how we support our teams on the ground, and how we operate in a sustainable way.

“They reflect our dedication to continuous improvement, global best practices, and delivering exceptional value.”

04/06/2026

Take the guesswork out of Posi-Joist specification.

With MiTek’s interactive Posi-Calculator, you can quickly find the most efficient Posi-Joist solution for your floor or roof project.

The Posi-Calculator allows you to:

Input span and load requirements

- Explore multiple Posi-Joist depth options

- Compare potential solutions quickly

- Inform your next steps before speaking to a MiTek-licensed manufacturer

A helpful first step for any Posi-Joist project.

Try it here: www.mitek.co.za/posi-calculator

Project Type Configuration Load Details Floor Dead: kN/m2 Roof Dead: kN/m2 Ceiling Dead: kN/m2 Floor Imposed: kN/m2 Partition: kN/m2 Snow: kN/m2 Span (mm) Maximum Height (mm) Results If your requirements are outside of the standard configurations available, or you require further information for spe...

02/06/2026

Following the launch of our first Aspire film, we’re now sharing the full written story behind Richard Polling, MRC Group and MiTek’s Ultra Span system.

It’s a strong South African business story. Richard talks openly about building the MRC Group through several market shifts, and choosing a design and build approach focused on quality, accountability and practical problem solving.

The article also explores how MRC Group has worked with MiTek and Ultra Span on projects including Cashbuild HQ in Johannesburg and the Stadio project in Durbanville.

For Richard, Ultra Span brings the strength, span and capability needed when projects demand more from the roofing structure.

It’s a great read for anyone interested in building envelope solutions, smarter roofing systems, solar preparation, refurbishment, data centres and the value of working with partners who get involved early and understand the detail.

A big thank you again to Richard Polling and the MRC Group team for sharing their story.
Read the full article here: https://bit.ly/49tCwNr

Want to see what Ultra Span could do for your next project?

Download the Ultra Span brochure:
https://bit.ly/4uEhe8k

Submit an Ultra Span design request:
https://bit.ly/49sZswb

Our interview with MRC Group’s Richard Polling offers a distinctly South African perspective on succeeding in a challenging market. As he says, “Africa’s the place of opportunity.” For Richard, Co-Founder and Group Director of MRC Group, success has demanded tenacity, creativity, and a readi...

21/05/2026

Recent storms across parts of South Africa have been a clear reminder that roof, and wall, performance depends on more than the visible structure.

A roof is only as secure as the connections supporting it. That includes the wall ties and masonry connections specified for the building’s location, exposure and wind load requirements.

SANS 10400-K sets out important requirements relating to wall ties, masonry construction and structural performance. For builders, engineers and contractors, compliance with these standards is not just a paperwork exercise. It helps ensure the roof and wall structure work together as intended, especially when buildings are exposed to severe weather.

MiTek Wall Ties are engineered for demanding conditions. They’re tested for coastal locations, extreme wind loads, and driving rain.

Available as galvanised and stainless steel options for coastal exposure, you can also expect MiTek Walls Ties to:
✓ Withstand lateral forces during severe weather events
✓ Work with brick-to-brick, brick-to-block and timber frame to masonry
✓ Meet structural and masonry building regulations
✓ Provide fast embedment into mortar joints - no specialist tools

When building, repairing or restoring roofs, take the time to check the specification. The right connection detail matters.

Ask your MiTek representative about the right wall tie specification for your project.

11/05/2026

MiTek South Africa’s first Aspire story is here.
We’re excited to launch the first film, featuring Richard Polling, Co-Founder and Group Director of MRC Group.

In the video, Richard explains how Ultra Span has become one of MRC Group’s go to solutions for light gauge steel frames and trusses, thanks to its strength, span, durability and value engineering benefits.

On the Stadio project, where almost every truss was different and the façade tolerances were tight, early design work with MiTek helped the team get the structure right before it reached site.

It’s a brilliant first story for MiTek South Africa: a strong project, a serious technical challenge, and a customer who understands the value of early design thinking, good engineering support, and getting the details right.

A big thank you to Richard Polling and the MRC Group team for sharing their story with us.

Watch the film and hear Richard’s perspective on working with MiTek and Ultra-Span

Want to see what Ultra-Span could do for your next project?

Request an Ultra-Span design:
https://go.mitek.co.za/l/1070893/2026-01-13/964bbm

Download the Ultra-Span brochure:
https://go.mitek.co.za/l/1070893/2026-03-25/9674pj

06/05/2026

Calculating roof sheeting quantities can still take far longer than it should.

That's exactly why MiTek South Africa developed the sheeting calculator within PAMIR.

Instead of exporting roof layouts into another system or manually drawing sections to work out quantities, the tool calculates and applies the roof sheeting directly in PAMIR.

It recognises the roof geometry, generates take-offs for corrugated, IBR or concealed-fix sheeting, and allows users to export the result straight into Excel for use with contractors or quantity surveyors.

For customers working on larger or more complex roofs, that can mean turning a task that used to take days into something done in seconds. It's a simple tool, but a very useful one. If you're already using PAMIR, this is well worth exploring.

Watch the video below to get a glimpse of how it works. ⬇️

And find out more here: https://www.mitek.co.za/2025/11/28/mitek-introduce-pamir-sheeting-calculator-to-save-customers-time-and-effort/

16/04/2026

Discover how MiTek is turning vision into reality with powerful platforms like PAMIR and Optics, designed to simplify communication and drive true integration across the construction value chain.

From cloud-based collaboration to automation and AI-driven design, David explains how smarter tools are helping to solve some of the industry’s biggest challenges, including the skills shortage and the need for greater sustainability.

This is a must-watch for anyone interested in the future of construction technology, digital transformation in the built environment, or MiTek’s next generation of design tools: https://www.youtube.com/watch?v=bUMrEZK0FPI

Or read the full interview with David and join the conversation on building faster, smarter and more sustainably. https://www.mitek.co.za/2026/03/17/the-future-of-building-design-software-is-closer-than-you-think-heres-why/

31/03/2026

MiTek South Africa has introduced the new Posi-Calculator, an online tool that helps construction professionals explore suitable Posi-Joist options at the early stages of a project.

Users can quickly test span, load and joist-depth combinations for both floor and roof applications, helping identify efficient solutions from the start. It’s a simple way to save time and improve accuracy before detailed engineering begins.

Try the Posi-Calculator: https://www.mitek.co.za/posi-calculator/

26/03/2026

Imagine having more time to focus on what truly matters in your business?

At the heart of this mission is Joss Smith, MiTek’s Product Director, who brings nearly 23 years of expertise in designing the software tools that keep the construction industry moving forward.

Now, he’s channelling that deep knowledge into MiTek Optics, a platform being purpose-built to help timber engineering professionals:
✅ Save time by streamlining complex workflows and cutting down admin.
✅ Work smarter with real-time insights that drive confident decisions.
✅ Stay flexible and connected, wherever, whenever.

Watch the video and see how Joss and the team are shaping the future. Read the full story: https://www.mitek.co.za/2026/02/26/from-component-manufacturing-to-cloud-innovation-joss-smiths-insight-driven-journey/

26/02/2026

MiTek Optics isn’t just another piece of software.

It’s being purpose-built to transform everyday workflows across the structural timber industry, empowering businesses with faster insights, streamlined processes, and the flexibility to work from anywhere.

From cutting administration, to supporting smarter decision-making, Optics is set to deliver the business benefits that modern manufacturers and builders need to stay competitive.

Watch now to see how the future of timber construction software is being built, one breakthrough at a time.