Machinery Specialist

05/11/2026

Loose scrap in a 20-foot container is the worst job in the yard.

The Container Tilter lifts and tips the whole box 90 degrees efficientlyand safely. Gravity does the loading, the scrap lands where you want it, and the container is back on a truck in a fraction of the time. No operator inside. No unsafe work. No wasted machine hours.

If containers are backing up in your yard because loading them is the slowest job on site, this is the fix.

📩 DM us for more detaills.

04/11/2026

Five hours of scrap recovery. Zero minutes of setup.

The ATIB Battery Magnet needs no cables, no generator, no hydraulic plumbed in. Integrated battery, radio remote control, and a grapple for direct pickup - mount it, switch it on, and start pulling ferrous material from anywhere in the yard.

Drop it on the excavator. Move it to the telehandler. Take it to the far corner where the cables do not reach. When the battery finally runs flat, you have already sorted what the wired units spent the day driving past.

Clean unloading from the cab, at the press of a button.

📩 DM us for the ATIB Battery Magnet range.

29/10/2026

Most people know the TreviBenne PMZ as a sorting grab. Then they see it do this.

Riverbank stone placement. Boulder handling. Rubble sorting. Waste separation. The PMZ is built to grip what a bucket drops and handle what a grab can’t.

360° rotation for precise placement. Grapple shells that close tight around irregular loads. The same grab that turns mixed waste into premium material can shift stone all morning.

One attachment. Every material your site throws at it.

📩 DM us for the range.

27/10/2026

Five attachments. Every forestry job covered.

Grind the stump. Shear the tree. Saw the trunk. Grip the timber. Clear the site.

The full forestry line-up from Machinery Specialist… Dipperfox stump grinders, OMEF Forestry Equipment tree shears and grapple saws, grapple saws and grabs. European-built precision meets Australian conditions, from 1.5-tonne minis up to 30-tonne carriers.

We’ve got attachments for every stage of the job.

DM us your machine model and we will spec the attachment to fit.

25/10/2026

No excavator. No cage. No noise permit. Just one operator and a handheld jaw. 🔧

The TEHMA Combi Crusher, Spreader & Shear is for the jobs big iron cannot reach - internal strip-outs, staircases, balconies, tight-access demolition where a 5-tonne machine is not getting through the front door.

Crush concrete. Cut rebar. Spread frames. One tool, three jobs, and quiet enough for occupied buildings and after-hours work.

If your demolition job needs machine access that the site does not have, this is how you get it done.

📩 DM us for the TEHMA Combi range.

Send a message to learn more

22/10/2026

Fresh off the factory floor and headed for Australia.

Another Euromec Eurobaler 530D rolled out of the Italian plant this week… and it is on its way to a yard near you.

Its 5.3-metre loading box takes whole cars, engines and all. One pass and a Commodore becomes a dense, stackable bale ready for transport or the shredder. Mobile, road-transportable in minutes, with remote control and automatic cycle as standard.

There is a reason these keep selling before they even land. Stop shipping air. Start shipping bales.

📩 DM us for the Eurobaler range.

21/10/2026

Demolition is not destruction. It is precision.

Every structure that comes down makes way for something new. The job is not to smash - it is to control. Control the fall. Control the crush. Control the separation of concrete from rebar, slab from structure, rubble from recoverable material.

The TreviBenne HC Series Primary Crusher does that job. Flyovers, foundations, reinforced concrete walls - bite by bite, in the hands of one operator, from one cab.

Italian-built. Available through Machinery Specialist.

📩 DM us for the HC Series range.

18/10/2026

Blades are here!

We just unboxed the first batch of Turkish-made Yalman blades at Machinery Specialist HQ - and this changes something important for your yard.

You no longer need to chase blades machine by machine. Yalman cuts blades for literally any brand: shears, shear balers, granulators - Lefort, idromec, Metso, Danieli, Vezzani, Bonfiglioli. If it cuts scrap, we can supply the blade for it.

Why does this matter? Because a dull or cracked blade does not just slow your cut. It stops your whole line. And we can save you in both cost per ton and replacement blade cost.

Stock is here. Sizes vary by machine.

16/10/2026

POV: It's Friday night. Everyone's knocked off. The Powerhand is still holding your coldie.

This machine strips an entire vehicle without breaking a sweat - so looking after the drinks? Easy work.

The Power Hand Auto Dismantler is engineered for precision. Built for auto recyclers who want total control, zero waste, and... Friday drinks.

Comment 🍺 if you're already there.

DM us to see what Powerhand can do for your yard.

13/10/2026

One cut. One hold. One operator. 🌲

No climbing. No chainsaw. No ground crew in the drop zone. This OMEF Grapple Saw on a compact track loader does the whole job from the seat - grips the trunk, saws through, and lowers the timber exactly where it needs to go.

And here is the part most people miss: this is not just an excavator game. Mounted to a compact track loader, the OMEF Forestry Equipment Grapple Saw fits sites where a full-size excavator cannot go - tight blocks, backyard removals, urban clearance.

The saw that used to need a big machine now just needs an operator.

📩 DM us for the OMEF Grapple Saw range.