Krah USA

Call Directions Website Contact the business

Krah USA Krah USA is a premier manufacturer of High-Density Polyethylene (HDPE) pipes, known for their durability and reliability.

With a commitment to quality and innovation, Krah USA provides solutions for various applications!

Stop forcing generic pipe into unique civil environments. Engineer the profile around the mission.Not every civil projec...
11/03/2026

Stop forcing generic pipe into unique civil environments. Engineer the profile around the mission.

Not every civil project is a simple, dry-ground trench.

One job requires sliplining an old culvert beneath a busy downtown intersection. Grout pressure is high. Clearances are tight. Internal hydraulic capacity cannot be sacrificed.

Maybe the next job is a marine outfall off the coast. There, the critical challenges are tidal currents, wave action, and precise negative buoyancy.
Off-the-shelf pipe forces a bad compromise. You either overpay for solid wall resin you don’t need, or you gamble with a standard profile that barely clears safety margins.

𝗖𝘂𝘀𝘁𝗼𝗺 𝗽𝗿𝗼𝗳𝗶𝗹𝗲 𝘄𝗮𝗹𝗹 𝗲𝗻𝗴𝗶𝗻𝗲𝗲𝗿𝗶𝗻𝗴 𝗳𝗶𝘅𝗲𝘀 𝘁𝗵𝗮𝘁 𝗰𝗼𝗺𝗽𝗹𝗲𝘁𝗲𝗹𝘆.

At Krah USA, we engineer the structural ribs of the pipe wall to match the specific forces of your installation. We place ring stiffness exactly where the calculations demand it. You get maximum strength, zero wasted material, and lower handling costs on site.

Every project is different. Your pipe should be, too.

An ISO certification isn’t just a plaque on an office wall or a logo on a spec sheet. It’s proof that quality in manufac...
11/02/2026

An ISO certification isn’t just a plaque on an office wall or a logo on a spec sheet. It’s proof that quality in manufacturing isn't an accident—it’s an engineered habit.

In heavy civil infrastructure, "trust us" doesn't cut it. When you’re winding large-diameter HDPE pipe to sit 20 feet under an interstate, hold back massive soil loads, and protect a community’s water network for 𝘰𝘷𝘦𝘳 𝘢 𝘤𝘦𝘯𝘵𝘶𝘳𝘺, there is zero margin for guesswork.

Holding an ISO certification means our entire operation is held to rigorous, third-party audited global standards. From the moment 100% virgin resin enters our facility to the final revolution of the winding drum, every heat cycle, structural profile, and electrofusion joint is tracked and verified. Pipe #1 and Pipe #1,000 leave our plant with the 𝗲𝘅𝗮𝗰𝘁 𝘀𝗮𝗺𝗲 𝗺𝗲𝗰𝗵𝗮𝗻𝗶𝗰𝗮𝗹 𝗶𝗻𝘁𝗲𝗴𝗿𝗶𝘁𝘆.

For the engineers and municipalities specifying Krah USA, that translates to complete risk elimination. You don't have to hope the pipe was built right—you have third-party verified proof that what goes into the trench won’t fail down the road.

We’re proud of this standard because of the mindset behind it: total accountability, verified processes, and an obsession with doing things right the first time.

Build it once. Build it right. It's our thing.

𝘞𝘩𝘺 𝘢𝘳𝘦 𝘸𝘦 𝘴𝘵𝘪𝘭𝘭 𝘵𝘳𝘶𝘴𝘵𝘪𝘯𝘨 𝘤𝘦𝘯𝘵𝘶𝘳𝘺-𝘭𝘰𝘯𝘨 𝘪𝘯𝘧𝘳𝘢𝘴𝘵𝘳𝘶𝘤𝘵𝘶𝘳𝘦 𝘵𝘰 𝘢 𝘱𝘪𝘦𝘤𝘦 𝘰𝘧 𝘳𝘶𝘣𝘣𝘦𝘳?Traditional concrete and corrugated metal pip...
11/02/2026

𝘞𝘩𝘺 𝘢𝘳𝘦 𝘸𝘦 𝘴𝘵𝘪𝘭𝘭 𝘵𝘳𝘶𝘴𝘵𝘪𝘯𝘨 𝘤𝘦𝘯𝘵𝘶𝘳𝘺-𝘭𝘰𝘯𝘨 𝘪𝘯𝘧𝘳𝘢𝘴𝘵𝘳𝘶𝘤𝘵𝘶𝘳𝘦 𝘵𝘰 𝘢 𝘱𝘪𝘦𝘤𝘦 𝘰𝘧 𝘳𝘶𝘣𝘣𝘦𝘳?

Traditional concrete and corrugated metal pipes rely on bell-and-spigot joints squeezed together with rubber gaskets. But underground environments aren't static. Between soil settlement, heavy earth loads, and dynamic highway traffic, those joints inevitably shift.

Rubber degrades. Gaskets roll. Eventually, the system leaks. Water leaks 𝙤𝙪𝙩 to eat away at the dirt under the asphalt, while outside water sneaks in and drowns the local treatment plant with gallons it never needed to process.

At Krah USA, we don't just push pipe together. We fuse it.

Using electrofusion, our HDPE pipe joints are welded at the molecular level. The result isn't a series of connected pipes—it is a 𝘀𝗶𝗻𝗴𝗹𝗲, 𝗺𝗼𝗻𝗼𝗹𝗶𝘁𝗵𝗶𝗰, 𝗰𝗼𝗻𝘁𝗶𝗻𝘂𝗼𝘂𝘀 𝘀𝘆𝘀𝘁𝗲𝗺. No weak links, no root intrusion, and absolutely zero leaking.

When you’re burying infrastructure 20 feet deep, you shouldn't have to cross your fingers that a rubber ring holds up.

𝗪𝗵𝘆 𝗞𝗿𝗮𝗵 𝗨𝗦𝗔 𝗗𝗼𝗲𝘀𝗻'𝘁 𝗚𝗮𝗺𝗯𝗹𝗲 𝗪𝗶𝘁𝗵 𝗥𝗲𝗰𝘆𝗰𝗹𝗲𝗱 𝗣𝗹𝗮𝘀𝘁𝗶𝗰𝘀:Recycling sounds like the ultimate win for sustainability—until you b...
10/29/2026

𝗪𝗵𝘆 𝗞𝗿𝗮𝗵 𝗨𝗦𝗔 𝗗𝗼𝗲𝘀𝗻'𝘁 𝗚𝗮𝗺𝗯𝗹𝗲 𝗪𝗶𝘁𝗵 𝗥𝗲𝗰𝘆𝗰𝗹𝗲𝗱 𝗣𝗹𝗮𝘀𝘁𝗶𝗰𝘀:

Recycling sounds like the ultimate win for sustainability—until you bury it 20 feet underground expect it to last 100 years.

In heavy civil infrastructure, there is zero margin for guesswork.

Recycled plastics bring prior thermal breakdown, erratic melt flows, and microscopic contaminants. When massive soil loads and dynamic highway traffic press down, those hidden variations become stress cracks, joint weaknesses, and premature failure.

That’s why Krah USA manufactures exclusively with 100% virgin, pressure-rated HDPE resin. Pure, traceable, uncompromised material from the first revolution of the drum to the final weld.

The greenest pipe isn't the one made from regrind today—it’s the one nobody has to dig up and replace tomorrow.

Our pipe is 100% recyclable at the end of its lifecycle. But for the next century? It’s engineered to hold the line without flinching.

Build it once. Build it right.

10/22/2026
05/14/2026

We don’t do "𝘚𝘵𝘢𝘯𝘥𝘢𝘳𝘥." 🚫 We do "𝗦𝗼𝗹𝘃𝗲𝗱." ✔️

Our industry is obsessed with "standard" pipe sizes because it’s easy for the manufacturer. But water doesn't come in standard volumes, and your project doesn't have standard constraints.

At Krah USA, we don't just pull a pipe off a shelf. We engineer the profile to match your specific load requirements.

𝗪𝗵𝘆 𝗶𝘁 𝗺𝗮𝘁𝘁𝗲𝗿𝘀:
▪️𝗟𝗲𝘀𝘀 𝗪𝗮𝘀𝘁𝗲: You aren't paying for material you don't need.
▪️𝗠𝗼𝗿𝗲 𝗙𝗹𝗼𝘄: Better hydraulics = less stagnation.
▪️𝗧𝗼𝘁𝗮𝗹 𝗖𝗼𝗻𝘁𝗿𝗼𝗹:We control the stiffness; you control the site.

If you’re still using 100-year-old tech for 21st-century water retention problems, you’re the bottleneck. Let’s fix that.

𝗦𝘁𝗼𝗽 𝗯𝘂𝗶𝗹𝗱𝗶𝗻𝗴 𝗿𝗼𝗮𝗱𝘀 𝘄𝗶𝘁𝗵 𝗮𝗻 𝗲𝘅𝗽𝗶𝗿𝗮𝘁𝗶𝗼𝗻 𝗱𝗮𝘁𝗲.The most dangerous part of our infrastructure is the part we can't see. When...
05/11/2026

𝗦𝘁𝗼𝗽 𝗯𝘂𝗶𝗹𝗱𝗶𝗻𝗴 𝗿𝗼𝗮𝗱𝘀 𝘄𝗶𝘁𝗵 𝗮𝗻 𝗲𝘅𝗽𝗶𝗿𝗮𝘁𝗶𝗼𝗻 𝗱𝗮𝘁𝗲.

The most dangerous part of our infrastructure is the part we can't see. When we bury pipes that are prone to corrosion and joint failure, we aren't just installing drainage — we are setting a countdown for the road above it.

It’s time to close the "longevity gap" and start building the 100-year foundation our communities deserve.

Read our new LinkedIn article on the engineering behind 𝗧𝗵𝗲 𝟭𝟬𝟬-𝗬𝗲𝗮𝗿 𝗥𝗼𝗮𝗱 ⬇️

When we drive across a fresh stretch of highway, we judge its quality by the smoothness of the asphalt and the clarity of the lines. But to a civil engineer, that surface is merely a skin.

04/14/2026

The 100-year-old Tumalo Reservoir Road is getting a major upgrade with bike lanes and a smoother surface. But some neighbors say the changes may be leading to faster traffic and new safety concerns.

04/14/2026

UMATILLA — The Umatilla Marina is the recipient of the 2025 Golden Anchor Award. The award is part of the Oregon State Marine Board’s Clean Marina Program. Program coordinator Glenn […]

04/14/2026

🎤 Call for Proposals is now open for the 2026 Irrigation Show & Education Week!
The IA is inviting industry professionals to help shape the learning experience in Las Vegas, Dec. 7-10. This year’s call takes a new, expanded approach—with proposals accepted across three distinc tracks, designed to deliver timely, practical value for today’s irrigation professionals.
✅ IA University Education Sessions
✅ Industry Insights: Business & Economics
✅ Industry Insights: Emerging Technology & Research
Calling seasoned presenters and those bringing a fresh perspective to help move the industry forward.
🗓️ Proposal deadline: May 1
🔗 Learn more and apply: https://bit.ly/4tO7vLW

Address

3840 NW Bus Evans Lane
Prineville, OR
97754

Alerts

Be the first to know and let us send you an email when Krah USA posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Krah USA:

Shortcuts

Share

Nearby engineering companies